error fb Gplus IN twitter down-arrow Email Phone Check-Mark padlock circle_arrow minus plus play_btn close Clipboard_Icon Shopping-Cart_Icon Speech_Bubble_Icon Stethoscope_Icon pharmacists menu left-arrow right-arrow facebook search cart

How can I keep my Dexcom sensor adhered for the full 10 days?

This answer applies to:
Last Updated: September 10, 2020

This is a summary of a clinical article published by clinicians independent from Dexcom based on their knowledge and experience.* Dexcom has not tested these approaches, nor do we endorse these specific approaches. For detailed step-by-step instructions on how to use the Dexcom G6 Continuous Glucose Monitoring (CGM) System, please refer to the user guide.

Are you a swimmer, runner, or do you just have trouble with your sensor staying on? These adhesives and professional tips may help. Remember that what works best for one person may not work well for everyone. You may need to try several different products or methods to figure out what works best for you.

Liquid Adhesive Agents

Liquid adhesive agents can be used with the sensor adhesive patch1,2. Suggestions when using liquid adhesive agents are to:

  • Create an empty oval on the skin with the liquid adhesive product. Let skin adhesive dry. Insert sensor on clean skin in center of oval.
  • Or you may also soak the liquid adhesive into tape after placement on your body Product Additional Advantages Professional tips

 

ProductAdvantagesProfessional tips

No-Sting Skin Prep (Smith&Nephew)


- Provides barrier protection


- Comes in wipes or liquid
- Not as strong as Skin Tac or Mastisol


Skin Tac™ (Torbot)

- Provides barrier protection
- Higher adhesive properties than Skin Prep
- Latex-free, hypoallergenic, nonrubber adhesive


- Comes in wipes or liquid
- Consider use of reciprocal removal product - Tac Away

Mastisol® Liquid Adhesive (Eloquest)

- Higher adhesive properties than Skin Prep or Skin Tac

- Comes in liquid, swabs, or single use vials
- Consider use of reciprocal removal product - Detachol

 

Adhesive Patches or Tapes


Additional adhesive patches or tape can be applied over the sensor adhesive patch1,2. Suggestions when using adhesive patches or tapes are to:

  • Cut a hole in the adhesive patch or tape to fit over transmitter
  • Cut the adhesive patch or tape into strips to use ‘‘picture frame’’ technique around sensor adhesive patch1,3

 

ProductAdvantagesProfessional tips

IV3000 (Smith&Nephew)

- Thin transparent film
- May cause fewer reactions than Tegaderm


- May also be used as a barrier when placed under sensor tape
- Not breathable, may peel with sweating or if water gets under

Tegaderm HP (HP stands for ‘‘Holding Power’’)

- Thin transparent film
- May adhere more strongly than standard Tegaderm


- Not breathable, may peel with sweating or if water gets under

Hypafix®

- Thicker, fabric-like adhesive than transparent films
- Can be cut to size
- Excellent adhesion even when wet


- Excellent staying power and thickness
- May cause less trauma to skin upon removal2

Opsite™/Opsite
Flexifit™ (Smith&Nephew)


- Breathable, transparent film with moderate permeability

- Can come as precut patches or in a roll

Blenderm™ (3M)


- Clear plastic hypoallergenic tape

- Comes in a tape roll, best used as a supplement to counteract peeling patch

Transpore™ Surgical Tape


- Clear, porous, plastic hypoallergenic tape

- Comes in a tape roll, best used as a supplement to counteract peeling patch

Kinesiology tape:
- RockTape®
- KT Tape


- Comes in a roll for custom cutting
- Gentle on skin with mild stretch

- Similar material to RockaDex and GrifGrips

Cloth-like patches:
- GrifGrips®
- RockaDex
- Simpatch™


- Precut for CGM
- Flexible and breathable
- Excellent adhesion even when wet
- Bright colors and shapes

- Similar materials to kinesiology tapes and may be stretched or cut to fit a variety of devices and body shapes

Nonadhesive wraps:
- Coban
- Ace
- Bands4Life


- If you are unable to tolerate additional adhesive, wraps may help keep your sensor in place

- Wrap loosely, do not compress skin with elastic wraps
- Remove during nighttime to avoid tissue compression
- Consider for short-term use—during sports, activity, etc.

 

 

*This paper was based on: Messer L. , & Beatson C., Preserving Skin Integrity with Chronic Diabetes Technology & Therapeutics Volume 20, Supplement 2, 2018.
1. Chase HP, Messer L: Understanding Insulin Pumps and Continuous Glucose Monitors. 3rd ed. Denver: Children’s Diabetes Research Foundation, 2016.
2. Englert K, Ruedy K, Coffey J, et al.: Skin and adhesive issues with continuous glucose monitors: a sticky situation. J Diabetes Sci Technol 2014;8:745–751.
3. Ives B, Sikes K, Urban A, et al.: Practical aspects of realtime continuous glucose monitors: the experience of the Yale Children’s Diabetes Program. Diabetes Educ 2010;36: 53–62.
Failure to use the Dexcom G6 Continuous Glucose Monitoring System (G6) and its components according to the instructions for use provided with your device and available at https://www. dexcom.com/safety-information and to properly consider all indications, contraindications, warnings, precautions, and cautions in those instructions for use may result in you missing a severe hypoglycemia (low blood glucose) or hyperglycemia (high blood glucose) occurrence and/or making a treatment decision that may result in injury. If your glucose alerts and readings from the G6 do not match symptoms, use a blood glucose meter to make diabetes treatment decisions. Seek medical advice and attention when appropriate, including for any medical emergency.

LBL019054 Rev001
 

Need Additional Help?

Submit a Tech Support Request

Request Sensor Overpatches

Chat Live with Tech Support

At this time, live chat is only available to US customers, Monday-Sunday from 7AM-9PM PDT.

Need Additional Help?

Submit a Tech Support Request

Request Sensor Overpatches

Chat Live with Tech Support

At this time, live chat is only available to US customers, Monday-Sunday from 7AM-9PM PDT.